news

Advantages And Introduction Of Sprayer

Spray model number: 20,30,40,60,80,100 series dust removal noise reduction sprayer suitable for environmental protection industry. Dust prone coal and other materials storage yard. Discharge port, site, wharf, steel mill, etc. Lower the temperature. Spraying drugs in public places or landfills, etc

Spray machine product software system: 1. Spray machine power, spray machine range selection coverage, spray machine work efficiency is high. The spray speed is fast. 2. When the sprayer sprays water and dedusts the storage yard that is easy to cause dust. The spray is fine. When in contact with drifting dust. It quickly reduces dust to dust. 3. The sprayer is flexible. Can use three-phase 380v mains power. It can also supply power with generator set. 4. The sprayer can be fixed on the elevated platform. It can also be fitted with a generator set for power supply and installed on a transport vehicle. 5 Sprayer operation flexible use safe and reliable. Remote and manual control operation. The horizontal rotation spray Angle can be controlled and adjusted at will. 6 Spray machine water consumption compared to other spray suppression equipment spray gun sprinkler less. The area covered by water mist is much larger than that of other dust suppression equipment.

Advantages of sprayer equipment. 1 Sprayer automatic microcomputer control 2 sprayer bidirectional Chinese wireless remote control system 3 Sprayer remote control handle can monitor the working state of the equipment in real time 4 Sprayer can arbitrarily adjust the size of the left and right rotation Angle through the wireless Chinese remote control handle. 5 Sprayer perfect electronic circuit to machinery and circuit for a full range of protection. 6 The sprayer can adjust the fan starting time wirelessly 7 The sprayer can adjust the left and right rotation and reversal waiting time 8 The sprayer wireless Chinese remote control can display the current ambient temperature. 9 The sprayer is easy to operate. Easy to use. Chinese display at a glance.

Fog gun machine maintenance: Fog gun machine is mainly composed of air duct assembly, pitch adjustment device, spray machine horizontal rotation component. High pressure spray water system is very important for fog gun machine. In addition to the daily use of spray machine dust. Also pay attention to the maintenance and maintenance of the fog gun machine. Ensure the integrity of each part.
Before starting the spray machine, check the stability of the parts of the fog gun machine. If the spray machine is abnormal, it should be handled in time. To avoid accidents, check the oil level of the pump regularly every week. Replenish oil level in time. Make sure the oil level is just halfway down the deep cover. Avoid running out of oil to burn out the pump, sprayer every other week. The sprayer tightens the lid of the butter cup twice clockwise.

The oil must be changed once when the sprayer pump accumulatively runs for a month. Ensure the normal operation of the pump, open the independent operation mode on the electronic control plate every three weeks, and repair the fan pump and heating belt respectively.
If the fog gun is not used for a long time. The water in the pump should be completely drained and the triangle belt removed. Hose nozzle and other parts. Wash and dry. Store randomly in dry. A cool place. When the fog gun machine runs for a long time or is improperly operated. There will be a little glitch. Understand the cause of the fault and the solution. It will avoid a lot of unnecessary waste of resources and improve work efficiency.